View Full Version : A20 integra (1st gen)
evil88accordLX
11-07-2008, 09:18 AM
now that i have your attention, is an a-series a direct drop in for the 86-89 integras? i know, who would do such a thing? the reason i ask is because hasport now makes a b-series mount kit for the integra. the fronts of the 2 cars are virtually identical. and if the A will bolt into the integra, the new b-series mounts should work for the 3gee.
cygnus x-1
11-07-2008, 10:28 AM
I highly doubt it. The 1g Integras had the D16A1 (USDM) which is very different from the A20. The chassis are similar but not the same.
C|
AccordB20A
11-07-2008, 10:34 AM
indeed the 1g integra has the same mounts as the 1g CRX and 3g civic. nop front engine mount, no dog bone, Just a mount coming off the front of the gearbox, a rear mount and a side motor side mount from the front of the motor to the chassis where the accord has a front mount, rear mount, motor side mount and dog bone
evil88accordLX
11-07-2008, 10:50 AM
so the chassis points where the engine "hangs" is different? thats what im concerned with. the part that is welded into the car, not the part that bolts to the engine.
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.