Printable View
Hi I was looking if someone posted anything about these rims but I couldn't find anything. I know the bolt pattern is the same... i just don't know if it will rub... and if I'am going to need spacers???
Item Specifics -
Rim Material: Alloy
Bolt Pattern: 4 x 3.93 or 4 x 100
Rim Width: 6.5J
Rim Brand: Factory, OEM
Rim Diameter (inches): 16
Rim Structure: --
Offset: 55
Tires: 205/45/16
Manufacturer Part Number: 08W16SLN100
Number of Bolts: 4
they may rub a lil bit
but you can always go with a 205-40-16 tire and be on the safer side
55mm is too high of an offset for a 3g. That will probably rub on the UCA's, unless you used a spacer of some sort. The normal offset range is 45 and lower. The lowest I would go though is about 35.
i wanted to get some of the same rims....but they are 17 pounds per rim...so i just went with some rotas they are 3 pounds lighter and cheaper.
i seen people run them on like 2000 civics...so i would think they would fit....im running 205-50-16s on my car....and it rubs in the back when i turn
yeah i rub a little bit in the rear with 2.25" drop on 205/50/15
i need to roll my fenders
what about 2002 civic si wheels? dont know if the bolt pattern is the same, but the wheels are 15s and only weigh like 11 pounds each. and yes its a 4 bolt, they changed in 03 i believe....Quote:
Originally Posted by MessyHonda
Quote:
Originally Posted by evil88accordLX
i dont think they are 11 pound...because everyone would want them cuz 11 pounds for a 15 inch rim is light.
