Hi I was looking if someone posted anything about these rims but I couldn't find anything. I know the bolt pattern is the same... i just don't know if it will rub... and if I'am going to need spacers???
Item Specifics -
Rim Material: Alloy
Bolt Pattern: 4 x 3.93 or 4 x 100
Rim Width: 6.5J
Rim Brand: Factory, OEM
Rim Diameter (inches): 16
Rim Structure: --
Offset: 55
Tires: 205/45/16
Manufacturer Part Number: 08W16SLN100
Number of Bolts: 4
they may rub a lil bit
but you can always go with a 205-40-16 tire and be on the safer side
55mm is too high of an offset for a 3g. That will probably rub on the UCA's, unless you used a spacer of some sort. The normal offset range is 45 and lower. The lowest I would go though is about 35.
10/22/06- 120,003 miles 1/09/09- 139,000 miles
11/29/07- 127,945 miles 3/09/09- 141,000 miles
03/01/08- 129,000 miles
10/19/08- 136,000 miles
Blue 3geez
10.8.06 Photoshoot
1.7.07 Photoshoot
i wanted to get some of the same rims....but they are 17 pounds per rim...so i just went with some rotas they are 3 pounds lighter and cheaper.
i seen people run them on like 2000 civics...so i would think they would fit....im running 205-50-16s on my car....and it rubs in the back when i turn
1989 Honda Accord LX-i
B18c1 swap since 7/2011
175whp and 132tq
Redzone tuned
yeah i rub a little bit in the rear with 2.25" drop on 205/50/15
i need to roll my fenders
what about 2002 civic si wheels? dont know if the bolt pattern is the same, but the wheels are 15s and only weigh like 11 pounds each. and yes its a 4 bolt, they changed in 03 i believe....Originally Posted by MessyHonda
i dont think they are 11 pound...because everyone would want them cuz 11 pounds for a 15 inch rim is light.
1989 Honda Accord LX-i
B18c1 swap since 7/2011
175whp and 132tq
Redzone tuned
Posting Permissions
Reply With Quote
Bookmarks