88 LX-i hatch parting out.

Printable View

Show 100 post(s) from this thread on one page

03-10-2004, 02:30 PM
markmdz89hatch

Quote:

Originally Posted by BensAccordLxi

Mark (SMACK) I sold all the tranny stuff. The car was rear ended so only the passanger side tail is ok. I'll see about the brake master cyl. when the engine is pulled. It was suposed to be pulled last week but the mechanic had a problem (jail) and couldn't work for a few days. The engine is not sold yet. Every one is waiting to see the price on shipping for it. The shift rod has been cut down so it is shorter but I still have it. All I had done to the exhaust was a muffler. Ask Josh how bad ass my car sounded with it. The mufflet is off the car. It's not pretty but it is very functional.

Josh, the struts my need to be warrentied out. if you put the stocks back in you can have them for free. Also, if you have some 14" steel wheels/w tires I can slap on my car, I'll sell you my balck wheels for $50.00, they need new tires.

errr.... shit, that hurt. Anyway, I need another smack b/c I thought you lived in PA, not AZ. PA I can do, that's an easy drive, AZ, that's not quite as nice.

Ok, the brake stuff, don't forget the proportioning valve too.

Hmm... if the motor doesn't go due to shipping cost, maybe you'll sell just the head? ...that of course depends on shipping cost too.

....wheels.... did I hear wheels.....???? I know you said Josh, but....
03-10-2004, 02:41 PM
BensAccordLxi

Well, how much are you willing to spend on the head? If the number is right, and Chris ends up not wanting it, I'll sell it to you with the Bullfrog cam. I asked Josh because he might be able to slap his wheels on my Accord so it's not on blocks if I sell the wheels.
03-10-2004, 04:52 PM
goldyaccord

Ben,

what do you mean by warrantied out? what struts do you have in the car right now and what do you need to swap out?

I'll come down there and put in the whatever stockies you need to put in and take the other ones from ya. as for my stock wheels, I dont have them anymore.. sold em to a guy for 100 bucks. I only have my GSR blades as my only set.

I'm off to Speedworld for afew runs and wont be back till aroudn 11pm tonite so I'll repy around that time.
03-10-2004, 05:09 PM
BensAccordLxi

I have Tokico Blue struts. They have a life time warrenty. I'm not sure if they are blown or not. If they are blown, they need to be warrentied out.
03-11-2004, 08:43 PM
goldyaccord

Quote:

Originally Posted by BensAccordLxi

I have Tokico Blue struts. They have a life time warrenty. I'm not sure if they are blown or not. If they are blown, they need to be warrentied out.

What about your stock struts?
03-11-2004, 09:03 PM
BensAccordLxi

Some cheap struts.
03-12-2004, 01:23 PM
goldyaccord

are they blown? if not. I'd just take those :D

basically whatever strut isn't blown... I'll take. Don't care if they are cheap or not.
03-12-2004, 03:40 PM
BensAccordLxi

I'm not sure if any of them are blown. I'll see.
03-13-2004, 02:29 PM
whyterice

will the right corner light fit an '87 LXi and do you still have it? Also have you got the the turn signal lights?
03-13-2004, 03:57 PM
BensAccordLxi

Bumper turn signals or the running/turn signal lights on the fender? The passanger side rear light will fit an 86-89 hatchback only.
03-15-2004, 03:20 PM
Nyodreamz

Whatcha got leftover?

You still have the door panels?
03-15-2004, 04:46 PM
BensAccordLxi

I still have them.
03-15-2004, 07:10 PM
Nyodreamz

how much you want for them?
03-15-2004, 08:22 PM
BensAccordLxi

Well, what all do you want? Do you want the auto window switch? The shipping cost is going to be around $20-$30. I'd say $40-$50 shipped
03-16-2004, 01:24 AM
Nyodreamz

Yeah the power window switch as well...my drivers side is a little slow and sounds like a constipated camel on the way up. Is that price for both panels or individuals. Shipping is a little tricky for me since I live in Germany. But I would like to have them. I will be in California for 3 weeks at the beginning of next month and in Chicago for a week at the end of the month. So I'll try to work a shipping angle if you can hold on to them for a couple of weeks.

Thanks
Nyo
03-16-2004, 09:57 AM
BensAccordLxi

You need the inside pannles and not the entire door right?
03-16-2004, 03:09 PM
Nyodreamz

Yeah the inside panels...I could use the passenger side door and front fender but I don't think I can ship that overseas through the mail. Where are you located?
03-16-2004, 03:32 PM
BensAccordLxi

Tucson Arizona
03-17-2004, 11:57 AM
petes_86lxi

Exterior door panels

do you still have the exterior door trim panels?
03-17-2004, 12:39 PM
BensAccordLxi

I have the out side door trim and fender trim. $20.00 shipped.
03-22-2004, 04:57 AM
petes_86lxi

Deal. Do you take paypal?

"I have the out side door trim and fender trim. $20.00 shipped."
03-22-2004, 12:50 PM
BensAccordLxi

I don't have a pay pal account. Shoot me a pm and I'll give you my address.
03-22-2004, 04:04 PM
p88lx

Would you have the front, left side marker light, left(driver's side) outside door handle and cruise control switch?
03-22-2004, 04:08 PM
BensAccordLxi

I don't have the side markers but I do have the door handle and cruise switch. Give me a day or so to get a price.
03-22-2004, 04:15 PM
p88lx

Thanks for the quick reply.

Show 100 post(s) from this thread on one page