my valve cover is a brass color. Does anyone know if this is rare or something? I haven't seen any others on here.....you can see it in my garage. Anyone know if it's part of a specific engine type package or something?
Also: does anyone know exactly what type of metal it is, and maybe recommend a polish for it?
Someone probably just painted it. Post a pic.
here's a pic....it doesn't appear to be painted.
I know it isn't the best pic, but it appears to be stock.
Well, I was secretly hoping that you had a JDM B20A and just didn't realize it, but it wasn't all that likely.
That's weird, I've never seen that before. Who had the car before you?
it does look orginal but you never know...its missing the air cleaner support that bolts on to it. not the best pic...take some more from diferent angles. i think its too much problems but you can take it out and check the bottom of it
1989 Honda Accord LX-i
B18c1 swap since 7/2011
175whp and 132tq
Redzone tuned
Maybe someone took the black finish off..?
The 1986 BS1 engine had this gold valve cover with a screw on emblem.
http://pages.videotron.com/omus
3geez member since July 12 2000
I need these parts!
https://www.3geez.com/forum/showthread.php?t=67742
yeah someone just took the black finish off. ive seen many of them at the jy's all the time. some still have residue left from the black finish. but yours seems to be polished somewhat
nevermind....i would believe carotman over me!
Carotman:thanks. :-) I was wondering which engine I had....that should clear it up. It does have the screw on emblem on it.
Anything special about the bs1 engine? any specific issues I should know about?
Same thing as an A20A1. I just uses the Old Honda engine label system.
http://pages.videotron.com/omus
3geez member since July 12 2000
I need these parts!
https://www.3geez.com/forum/showthread.php?t=67742
ah, ok :-)
That's cool, I want a valve cover like that!
Thanks Speed......I like it too. I'm going to try and shine it up...it does have a few little chips out of the finish here and there, but overall it's in great shape. And like I said....I haven't seen many (if any) other valve covers like it on here, so I guess in that way my 3g is kind of different from most...which is cool in its own way.
I posted this in another thread, but since people are looking at this one, I'll put it out here as well....mods, please feel free to delete the other one if you like (please move any replies to this thread though)
I just painted my front bumper black (with the bumper coating) today, and will be doing the back tomorrow. I'm also planning to paint the sides black from the trim down.
I may be buying a trunk lid from another user on here. It isn't the same color as my car, but I was wondering if anyone knows a decent source for color matched paint. I don't own a compressor, so it will probably end up being a careful (ha ha) can job....are Honda colors even available in the can?
I was thinking about painting the hubcaps black also....they're the factory caps:
Has anyone tried this? How did it turn out?
Last edited by Whistler225; 04-15-2006 at 02:08 PM.
If you want your wheels to be a different color, just take the wheel covers off. It'll look a lot nicer, I think.
and just leave the black steel wheels? I've seen that on a few other cars on here...to be honest, I didn't much care for the look....that might sound kind of picky, I dunno. It just looks to me like the person lost his hubcaps.
I'll try it and see what I think though.
It depends on the car. I like them because steelies aren't trying to look like something they're not. Of course, my car is red so they match well.
think they'll look good with two-tone gold on top black on bottom?
I cannot find my car's paint color anywhere...any ideas? it's YR-60M-3...would this be something I could get in the can at the dealership?
Yeha, my 86 4dr has a goldish cover like that. i like the look of it =), wihs it would fit my 89
ya i wouldent paint hub caps tyhey alwas turn out bad but try and find some aftermarket ones that are likr a black crome ive seen them on some cars and they look pritty good
Originally Posted by Whistler225
Thanks Speed......I like it too. I'm going to try and shine it up...it does have a few little chips out of the finish here and there, but overall it's in great shape. And like I said....I haven't seen many (if any) other valve covers like it on here, so I guess in that way my 3g is kind of different from most...which is cool in its own way.
I posted this in another thread, but since people are looking at this one, I'll put it out here as well....mods, please feel free to delete the other one if you like (please move any replies to this thread though)
I just painted my front bumper black (with the bumper coating) today, and will be doing the back tomorrow. I'm also planning to paint the sides black from the trim down.
I may be buying a trunk lid from another user on here. It isn't the same color as my car, but I was wondering if anyone knows a decent source for color matched paint. I don't own a compressor, so it will probably end up being a careful (ha ha) can job....are Honda colors even available in the can?
I was thinking about painting the hubcaps black also....they're the factory caps:
Has anyone tried this? How did it turn out?
I might do that, although I'm leaning pretty heavily toward a trip to the jy to try and find some Acura alloys for summer tires....and then keep the winter tires I have on the rims that are on it now.
I've changed my mind about the rest of the car....I'm still going to do black from the trim down, but I'm going to do a real paint job on the car in a different color. I was looking at this one site:
http://www.paintforcars.com/
best prices I've seen so far, and they have some interesting colors. I was looking at the Gunmetal Metallic, Copper, or Bronze as possibilities. Any thoughts? I also like the Midnight Blue and Omaha Orange.
My 1986 USDM Service Manual says the following:
Paint Color Codes
Hatchback
NH-82 = GREEK WHITE
B-33MZ = SONIC BLUE METALLIC Z
R-48M = REGENCY RED METALLIC
NH-91M = GRAPHITE GRAY METALLIC
NH95M = BLADE SILVER METALLIC
B-35M = MONTREAL BLUE METALLIC
Sedan
NH-95M = BLADE SILVER METALLIC
YR-60M = CHAMPAGNE BEIGE METALLIC
NH-91M = GRAPHITE GRAY METALLIC
R-48M = REGENCY RED METALLIC
YR-59M = MISTY BEIGE METALLIC
B-30M = STRATOS BLUE METALLIC
B-35M = MONTREAL BLUE METALLIC
should be a color that you could get at a body shop or maybe even a honda dealer?
Forrest
2004-2011?
I should paint my car B35M :p
http://pages.videotron.com/omus
3geez member since July 12 2000
I need these parts!
https://www.3geez.com/forum/showthread.php?t=67742
my friend has a B35M parts car
I think it's a nice color!!
i have the gold valve cover too anyone have any insight on this
my neighbor has one too...its wut they called the engine back in 86...the BS model but they were some left over to the 87 years cars have them...my neighbor has a 88 with one...he told me that the engine has like 98k on it when he got it
1989 Honda Accord LX-i
B18c1 swap since 7/2011
175whp and 132tq
Redzone tuned
Posting Permissions
Reply With Quote
Bookmarks