This car is currently gone, I have mixed it with a new chassis. Here is the current suspension thread.
This Thread will be updated with every new mod I add to my suspension
FRONT
1. 89 LX-i hubs (must be 88-89 LX-i Hubs) with new bearing
2. 11" rotors and Type R calipers
3. Full Prothane Poly Bushings for the Lower control arm and OEM for the rest
4. SS Steal braided brake lines all around
5. ARP extended Wheel studs (just because I wanted to)
6. 1988 Honda Civic Full Bodied D2 Racing Coilover Sytem
7. Suspension Techniques front sway bar.
8. 1988 Prelude 35/40 prop valve
9. all ball joints and tie rod ends.
10. Ingalls Camber Correction Kit
11. EBC Brake pads
REAR
1. Sei Rear disk brake Convertion
2. 1989 Acura Legend Rear Calipers (they have a bigger pistons)
3. Drilled and slotted EBC rotors
4. EBC green stuff brake pads
5. Suspension Techniques rear sway bar
6. Lower Poly shock bushings
7. 1990 Honda accord Full Bodied D2 Racing Coilover Sytem
Here is a pic of the whole setup with new bearings, and extended wheel studs.
11" rotors installed
Why you cannot use 14" rims
Rear Sway Bar install (picture was taken before the D2 upgrade)
Front LCA with Poly Bushings
Rear SE-i brakes with Legend calipers
D2 Racing coilovers
Adjustment knob
In the works 11" rear brake setup with larger Legend Calipers.
-My old Setup
1990 Civic Tokico Illuminas
I have had alot of people ask me for the Nopi item numbers for the bushings so here you go.
These are all Nopi Item Numbers Only (you can click them to take you directly to the nopi catalog.
You only need to order one of each kit I listed below (one kit = both sides of the car). Here is a picture to help you figure it out.
Front Lower Control Arm Bushing
Part Number: 432+0077
$30.08 Sugg. Retail Price
Front Lower Contol arm shock bushing
Part Number: 474+4110
$19.87 Your Price
Sway bar end links
Part Number: 461+0059
$17.48 Your Price
Bookmarks