im dropped on some ebay coilovers, prolly like 3", and my 14s rub, so like the tittle said do you guys think i can fit some 17s on there??? if you guys havent seen pics let me know. i really doubt i can fit anything bigger than 15s![]()
im dropped on some ebay coilovers, prolly like 3", and my 14s rub, so like the tittle said do you guys think i can fit some 17s on there??? if you guys havent seen pics let me know. i really doubt i can fit anything bigger than 15s![]()
you might have to raise up a tiny bit, but I cant see 17s being a problem if you want to be dumped. Just make sure you run a 205/40/17
My Project thread https://www.3geez.com/forum/project-c...dan-build.html
My Flickr: http://www.flickr.com/photos/jdmca5/
you think they will rub a lot?? ill prolly end up getting some better springs, maybe that kit that l3gion was working on with that guy , in the future but i really want some bigger rims now![]()
the coil over are adjustable right? if so just rise it up a bit.
1989 Honda Accord LX-i
B18c1 swap since 7/2011
175whp and 132tq
Redzone tuned
even if it is raised up, youu will need soem nice struts to keep the tires from rubbing. Keep in mind that at one point in time you will need to put something in the trunk or backseat and that can't weigh to much or instant rubbage.
I have a DZ 2.25 drop with 205/40/17 had to roll the back fenderwell to stop the rubbing![]()
LX-R coming soon Here's a hint. 89mm stroke/ 41.60cc head /ARP head & main stud's /SRP piston's 81.5mm 9:5:1/Crower Rod's & more to come
i have some ebay coil overs and i droped it all the way and my tires dont rub in the bak i had a lil rub in the front but it only happend once and i have some 205/40/17 tires on them
<-- 89 LX-i -->
Make sure you get some good shocksto go with the coilovers or your ride will be kinda bumpy.
also, keep in mind your offset. that will surely determine how they wheels will fit. off this topic, i just found a white 3rd gen coupe. i may have to check that out.
Keep it HONDA. Or at least Asian.™
*Weber 32/36*Pacesetter Header*2.25 in. Cat Back exhaust*SE-i rear disk brakes
B18C swap ditched, A20 to be revived
Looking for K20/trans for ultimate swap
wow, thats a definate head-turner. thats the kinda pics that inspire me to get my accord project underway.Originally Posted by TWOLOUDNPROUD
you should see whats under his hood
i have it as low as it goes (4" down all around) and my 205/40/17's only rub the paper stuff if i have the wheel turned all the way in one direction. it makes a hair of noise, but is harmless. no fender roll.
bury the bach.
http://home.stny.rr.com/versanick/burythetach
Bookmarks