i want a swaybar :[
i want a swaybar :[
thanks knarg another norcali member sweeeetreally nice car.
like everyone else mentioned, nice to see the progress.
when i got the car this fender was pretty much the worst of the body damage.. not horrible but still an eyesore imo
so NO MORE i say!
trying new fender on
all buttoned up
BLING BLING much nicer. now i just need to put on the OEM fender-well trim.. gotta grab some high powered tape
very nice now send me the old one
1988 Honda Accord LX-i Coupe 123k miles.
ok.. once you pay me for the other stuff first
* Install newly painted valve cover -DONE
* Install new fender - DONE
* Clean paint, rebuild and install vigor rear sway bar
* Install ST sway bar
* Clean, paint, rebuild and install prelude adjustable control arms
* Paint strut tower bar.. possibly with the same style of textured paint i used on valve cover
* Rebuild front suspension: Buy & install new upper and lower ball joints and tie rod ends
* Receive and install adjustable cam gear
* Buy and install Accel Super Coil (not super stock)
* Buy and install Accel 8mm yellow spark plug wires (to match coil )
* Replace leaky coolant sensor
* Replace oil pan gasket & oil.
* Check injector seals since the honda dealership said there was supposedly a problem with them.
nice fender...
1989 Honda Accord LX-i
B18c1 swap since 7/2011
175whp and 132tq
Redzone tuned
What is it about these cars? They get in your blood and you can't get it out. My wife has been after me for a long time to get rid of mine but I can't do it. It looks great and runs great. Why sell it???
Looks Good
2004-2011?
just got done scraping all the old tape off the fender trim.. damn that stuff was burly
Fender looks great!! Good match of paint!
Sweet Job
^ thanks.. all the times learning at the pico shop paid off and i was able to do something on my own for once
so i painted my rear sway bar what i thought was gloss black.... and it turns out i got 'charleston green' which comes in a can with a black cap, but it has a sticker with dark writing on it that says 'charelston green' lol.. it looks like it belongs on a forrest ranger's car now as i was painting it i was like hmm it looks kinda green, maybe it'll turn black as it dries.. but it only got greener
Originally Posted by frantik
like you like to say "DOOOOH!"
1989 Honda Accord LX-i
B18c1 swap since 7/2011
175whp and 132tq
Redzone tuned
Sw000t Nice car ^_^ I live in SJ maybe you could help me out like Where did you get your JDM lights and how much were they since the only ones i found were $65 shipped and im not even sure if theyre the right ones. (guy hasnt shown a pic)
hey man glad u like the car i got my jdm corners on ebay for $60 shipped so 65 isn't too bad just make sure you see them first
Yeah im trying to get the pictures from the guy, However he does sell alot of JDM parts his ebay name is like JDMNZ . lol
88 Lx-i Coupe
That's the guy I bought my JDM corners off of. He's a good seller, no doubt.Originally Posted by Kevii
10/22/06- 120,003 miles 1/09/09- 139,000 miles
11/29/07- 127,945 miles 3/09/09- 141,000 miles
03/01/08- 129,000 miles
10/19/08- 136,000 miles
Blue 3geez
10.8.06 Photoshoot
1.7.07 Photoshoot
lol so I went out side to pull off my strut bar to paint.. and that shit wasn't coming off for nobody It was installed at the same time as the shocks and it['s a good thing cause the bolts don't allow enough travel for it to go around the 3 little prongs.. it's only coming off if the shock bolts are lowered below the bar... so i guess i won't be painting that any time soon
Last edited by frantik; 06-27-2007 at 12:11 PM.
Mask off everything else around it (like a certain someone on the forum that I wont name) and paint it on the car.Originally Posted by frantik
yeah i dont like the idea of using a rattle can anywhere near my car really if i jack up the car with the shock tower unscrewed will the bolts lower? i might be able to do it that way and it's a lot faster than masking my whole engine bay + hood lol
what kind of swaybar did you get?
is it an 89 ST swaybar or 90/4g?
i got an ST front for a 3g and an OEM rear sway bar from a vigor.. still need to install them too :\
i can't find any swaybars for a 3g online :/
i need a new driver side fender mine is bent from the dam door,retarded crap
Bookmarks