i want a swaybar :[
i want a swaybar :[
thanks knargreally nice car.
like everyone else mentioned, nice to see the progress.another norcali member sweeeet
![]()
when i got the car this fender was pretty much the worst of the body damage.. not horrible but still an eyesore imo
so NO MORE i say!
trying new fender on
all buttoned up
BLING BLINGmuch nicer. now i just need to put on the OEM fender-well trim.. gotta grab some high powered tape
![]()
very nice now send me the old one![]()
1988 Honda Accord LX-i Coupe 123k miles.
ok.. once you pay me for the other stuff first![]()
![]()
* Install newly painted valve cover -DONE
* Install new fender - DONE
* Clean paint, rebuild and install vigor rear sway bar
* Install ST sway bar
* Clean, paint, rebuild and install prelude adjustable control arms
* Paint strut tower bar.. possibly with the same style of textured paint i used on valve cover
* Rebuild front suspension: Buy & install new upper and lower ball joints and tie rod ends
* Receive and install adjustable cam gear
* Buy and install Accel Super Coil (not super stock)
* Buy and install Accel 8mm yellow spark plug wires (to match coil)
* Replace leaky coolant sensor
* Replace oil pan gasket & oil.
* Check injector seals since the honda dealership said there was supposedly a problem with them.
nice fender...
1989 Honda Accord LX-i
B18c1 swap since 7/2011
175whp and 132tq
Redzone tuned
What is it about these cars? They get in your blood and you can't get it out. My wife has been after me for a long time to get rid of mine but I can't do it. It looks great and runs great. Why sell it???
Looks Good![]()
![]()
2004-2011?
just got done scraping all the old tape off the fender trim.. damn that stuff was burly
Fender looks great!! Good match of paint!
Sweet Job![]()
^ thanks.. all the times learning at the pico shop paid off and i was able to do something on my own for once
so i painted my rear sway bar what i thought was gloss black.... and it turns out i got 'charleston green' which comes in a can with a black cap, but it has a sticker with dark writing on it that says 'charelston green' lol.. it looks like it belongs on a forrest ranger's car nowas i was painting it i was like hmm it looks kinda green, maybe it'll turn black as it dries.. but it only got greener
![]()
Originally Posted by frantik
like you like to say "DOOOOH!"
1989 Honda Accord LX-i
B18c1 swap since 7/2011
175whp and 132tq
Redzone tuned
Sw000t Nice car ^_^ I live in SJ maybe you could help me out like Where did you get your JDM lights and how much were they since the only ones i found were $65 shipped and im not even sure if theyre the right ones. (guy hasnt shown a pic)
hey man glad u like the cari got my jdm corners on ebay for $60 shipped so 65 isn't too bad just make sure you see them first
![]()
Yeah im trying to get the pictures from the guy, However he does sell alot of JDM parts his ebay name is like JDMNZ . lol
88 Lx-i Coupe
That's the guy I bought my JDM corners off of. He's a good seller, no doubt.Originally Posted by Kevii
10/22/06- 120,003 miles 1/09/09- 139,000 miles
11/29/07- 127,945 miles 3/09/09- 141,000 miles
03/01/08- 129,000 miles
10/19/08- 136,000 miles
Blue 3geez
10.8.06 Photoshoot
1.7.07 Photoshoot
lol so I went out side to pull off my strut bar to paint.. and that shit wasn't coming off for nobodyIt was installed at the same time as the shocks and it['s a good thing cause the bolts don't allow enough travel for it to go around the 3 little prongs.. it's only coming off if the shock bolts are lowered below the bar... so i guess i won't be painting that any time soon
![]()
Last edited by frantik; 06-27-2007 at 12:11 PM.
Mask off everything else around it (like a certain someone on the forum that I wont name) and paint it on the car.Originally Posted by frantik
![]()
yeah i dont like the idea of using a rattle can anywhere near my car reallyif i jack up the car with the shock tower unscrewed will the bolts lower? i might be able to do it that way and it's a lot faster than masking my whole engine bay + hood lol
what kind of swaybar did you get?
is it an 89 ST swaybar or 90/4g?
i got an ST front for a 3g and an OEM rear sway bar from a vigor.. still need to install them too :\
i can't find any swaybars for a 3g online :/
i need a new driver side fender mine is bent from the dam door,retarded crap
Bookmarks