Here's my VIN Number: JHMBA544XGCXXXXXX
Is it rare that my car was built in Saltama Japan and imported, rather than built in the US Ohio plant?
Here's my VIN Number: JHMBA544XGCXXXXXX
Is it rare that my car was built in Saltama Japan and imported, rather than built in the US Ohio plant?
no... a lot of 3g's were built in japan. my rex was built in japan and my wifes eg hatch was built in canada.
dead white and blue
i belive all the 4 doors were built in japan, the states built the coupes in the 88-89 years... i dont remember the story about the hatchess though. but no not very rare at all
Four Doors were made in Japan, The USA, & Canada (I own a Ohio Made 1986)
Hatchbacks Were made in Japan Only
And Coupes Were made in the USA Only, but even exported to Japan
All 3rd Gen Accords With a Vin That starts with 1HG are made in America
All 3rd Gen Accords With a Vin That Starts With JHM Are Made in Japan
All 3rd Gen Accords With a Vin That starts with 2HG are made in Canada
In my experience I've Seen just as many Japan Made Sedans as USA Made Sedans
So No it's not really rare, but it's cool to know that your car was built in japan and that it was imported
Last edited by forrest89sei; 11-10-2007 at 03:30 PM.
2004-2011?
86 DX, BS engine, made in Japan and it shows.... no creaks squeaks rattles pops , just ticks and leaks
proud jhmca55 owner here!
there was an assembly plant at nelson in nz but dunno what the vin prefix was
they only assembled hondas for the nz market so none were exported
dont know where mine was made
the build plate has E-CA3 on it
then under that is the ca3=122*** chassis number
and the engine number after that
I'm guessing that the E is for where it was built
my usdm is usdm
1988 Honda Accord LX-i Coupe 123k miles.
My 89 LXi 4Dr is also USDM, oh well, still a Honda!
My Honda Fit is from Japan---does that help?!?!?!
ole blue was built in the Japan. the mother land
why does it say JHMBA5.. isnt BA5 a prelude chassis code???
im proud to be a E-CA3 owner
my 3 3gees are from japan.
1989 Honda Accord LX-i
B18c1 swap since 7/2011
175whp and 132tq
Redzone tuned
I guess my Accord is from japan to my vin starts JHMCA5
LX-R coming soon Here's a hint. 89mm stroke/ 41.60cc head /ARP head & main stud's /SRP piston's 81.5mm 9:5:1/Crower Rod's & more to come
Here is the OFFICIAL Vin Decoder from the 1989 Honda Accord Service Manual
Originally Posted by 1989 Honda Accord ServiceManual
2004-2011?
I have a USDM accord but ive owned a bunch of Japanese built accords, in my experience the japanese built ones have a little higher initial quality with the way everything fits and sounds/performs but the US built ones seem to hold up a little better, especially with rust
429whp 362wtq A20 TURBO. A20T>*
My car was also made in Japan. It's been almost all the way around the world, because it was made in Japan, bought in Germany, and now (obviously) driven in America.
10/22/06- 120,003 miles 1/09/09- 139,000 miles
11/29/07- 127,945 miles 3/09/09- 141,000 miles
03/01/08- 129,000 miles
10/19/08- 136,000 miles
Blue 3geez
10.8.06 Photoshoot
1.7.07 Photoshoot
mine is so jdm i found a lionel richie cassette with japanese writing when i opened up the plastic panels in the hatch. i still have it put up somewhere around here. oh and toothpicks wrapped in paper with japanese writing that were dropped into different areas of the car. i must have had a snacker on final assembly.
Bookmarks