Results 1 to 19 of 19

Thread: Custom Trunk/Interior/Intake

  1. #1
    DX User DanilosSE-I's Avatar
    Join Date
    Jun 2008
    Vehicle
    85 Honda Accord SE-i, 91 Honda Civic Si, 91 Honda Civic Std, 89 Honda Accord Lx
    Location
    San Diego
    Posts
    87

    Custom Trunk/Interior/Intake

    Hey how is it going, i have finally been able to register to the site so now i want to show the 2ndgenguy my ride. i saw that you did your trunk so i thought i would like to show you mine. all of the work i did myself. im from San Diego and my car has 223500 miles on it but runs strong. bought the car for 100 dollars put 400 to fix. the rest just came out of my pocket and dedication to bring back the life of the car. went through many stages of stereo system set ups to finally get the right one. installed 3 tft 7" screens in the headrests as well as the passenger visor( use this as the ps2 tv) also installed two 6x9 in between the 61/5 speakers underneath the rear window. also custom installed two additional 6x9 in the front driver and passenger door panels where the 5 1/4 speakers use to be as well as two tweeters. i re carpeted the head liner and vinyl spray painted all of the interior except for a few pices( waiting for the black carpet from ebay before i finish everything else) i got the rear seats reapohlstered in tijuana for 200 dollars. genuine black leather great. also put an 86-89 prelude intake on cost me 40 bucks off ebay. better than buying a new air filter. but so far i have a bit of a way to go.

    Things i need to do before completion:
    Reapholster front seats in black leather
    install carpet find bumber from junkyard
    get car painted same color
    finish off the 2nd half of trunk with almani 4 channel


    Its pretty much a hood rich vehicle not really into ricing it out just want it to look clean, unique and with a touch of DUB influence. please let me know what your opinion is and what do you think else would suit my ride.










    Last edited by DanilosSE-I; 06-09-2008 at 09:25 AM. Reason: forgot to insert additional photo



  2. #2
    3Geez Veteran MessyHonda's Avatar
    Join Date
    Feb 2006
    Vehicle
    89 LX-i(5speed)
    Location
    Bay Area
    Posts
    22,201

    Re: Custom Trunk/Interior/Intake

    clean car...needs a drop and tint

    1989 Honda Accord LX-i
    B18c1 swap since 7/2011
    175whp and 132tq
    Redzone tuned

  3. #3
    LX User Lil Mike's Avatar
    Join Date
    Nov 2007
    Vehicle
    84 Accord Hatchback, 92 Nissan 240sx Fastback
    Location
    Toronto, Ontario
    Posts
    363

    Re: Custom Trunk/Interior/Intake

    wow thats really clean, i really like the seats. too bad its auto and as messy said drop and tint

    thanks mkymonkey

  4. #4
    2ndGenGuy
    Guest

    Re: Custom Trunk/Interior/Intake

    Holy LCD screens batman!

    I like where you're going with the trunk. Big stereo but nice and tucked away. I think the wheels will look great once they're tucked into the fenders nicely. Your car is in great shape. Most of the SEi models I've seen are trashed. You're blessed (or cursed depending on how you look at it) with a unique engine too. I bet she's pretty quick!

    I think the black leather seats would look great. Are you doing a full black conversion? Always wanted to see that! And props for keeping with that color outside. I love that brown on the old Accords because it's a color that won't work on new cars, but looks great on our cars! Good luck and keep us posted with how it all goes!

  5. #5
    LXi User SZfiftyfour's Avatar
    Join Date
    Jun 2006
    Vehicle
    '82 Accord DX Sdn
    Location
    Ocala, FL.
    Posts
    664

    Re: Custom Trunk/Interior/Intake

    I like the body color.
    I hope you got an alarm, i can get in my 2g in 3seconds with a jimmy, very easy to break into.

  6. #6
    DX User DanilosSE-I's Avatar
    Join Date
    Jun 2008
    Vehicle
    85 Honda Accord SE-i, 91 Honda Civic Si, 91 Honda Civic Std, 89 Honda Accord Lx
    Location
    San Diego
    Posts
    87

    Re: Custom Trunk/Interior/Intake

    Yea i got an alarm as soon as i got tv's, didnt want them getting away with out a fighting chance, but yea thanks for the comps, shes pretty quick but i try not to push her so often, every once in awhile, she gets up and floats. the tint is coming. i've been wanting to drop it but im not sure. you guys know more then me, what springs should i use, are there any i can use from a different gen. i was thinking i could cut them then put them back on but dont want to take the risk. please let me know what i can do about the drop. thanks

  7. #7
    2ndGenGuy
    Guest

    Re: Custom Trunk/Interior/Intake

    You can order springs from a company in England called Spax Springs. They're the only ones left that I know of. Eibach made a Pro Kit, which are no longer in production, and I have the only set I know of (Thanks messy!) and B&G Springs might still make a set, but I'm not totally sure, since the distributors don't seem to have them anymore. You can cut them and see how it goes (I'm curious myself), and if it's bad, spring for the Spax springs or you can always throw a stock set back on there.

  8. #8
    DX User DanilosSE-I's Avatar
    Join Date
    Jun 2008
    Vehicle
    85 Honda Accord SE-i, 91 Honda Civic Si, 91 Honda Civic Std, 89 Honda Accord Lx
    Location
    San Diego
    Posts
    87

    Re: Custom Trunk/Interior/Intake

    Yea i saw that under your signature you have eibach. hey check this out i found the eibach springs it says it can lower it 1.3". is this what you have on your ride? if i get them do you think it will make it big difference. here is the url.

    http://www.modacar.com/products/Honda/Accord/Springs/

  9. #9
    2.0Si User Hazwan's Avatar
    Join Date
    Feb 2006
    Vehicle
    86 Honda Prelude
    Location
    Malaysia
    Posts
    3,846

    Re: Custom Trunk/Interior/Intake

    Nice work. Any engine bay pics?

    Can't wait to see its done

    1986 Honda Prelude build thread
    1981 Honda Accord (sold)

  10. #10
    3Geez Veteran Civic Accord Honda's Avatar
    Join Date
    Aug 2006
    Vehicle
    1995 Civic/ 1988 CRX
    Location
    Tehachapi Ca
    Posts
    13,103

    Re: Custom Trunk/Interior/Intake

    damn sexy !!
    i love the color too!!!

    1988 Honda Accord LX-i Coupe 123k miles.

  11. #11
    3Geez Veteran A18A's Avatar
    Join Date
    Sep 2005
    Vehicle
    1988 Honda Vigor
    Location
    New Zealand
    Posts
    8,081

    Re: Custom Trunk/Interior/Intake

    nice!!! should show us pics of that 3g accord lol

  12. #12
    2ndGenGuy
    Guest

    Re: Custom Trunk/Interior/Intake

    Quote Originally Posted by DanilosSE-I View Post
    Yea i saw that under your signature you have eibach. hey check this out i found the eibach springs it says it can lower it 1.3". is this what you have on your ride? if i get them do you think it will make it big difference. here is the url.

    http://www.modacar.com/products/Honda/Accord/Springs/
    You can try ordering from there, but I'm pretty sure they'll tell you that they're out of stock after you put the order through. But if there's a chance they've got them or can get them, then fuck yes. That's what I've got on my car, and I like em. Though it's not a really extreme drop, but makes the car look pretty good, IMO.

  13. #13
    84Accord's Avatar
    Join Date
    Jun 2008
    Vehicle
    1984 Accord LX
    Location
    Bay Area
    Posts
    615

    Re: Custom Trunk/Interior/Intake

    Quote Originally Posted by DanilosSE-I View Post
    Yea i saw that under your signature you have eibach. hey check this out i found the eibach springs it says it can lower it 1.3". is this what you have on your ride? if i get them do you think it will make it big difference. here is the url.

    http://www.modacar.com/products/Honda/Accord/Springs/
    thats the place i get most of my stuff for my 2g. their warehouse is about 15 min from me

  14. #14
    84Accord's Avatar
    Join Date
    Jun 2008
    Vehicle
    1984 Accord LX
    Location
    Bay Area
    Posts
    615

    Re: Custom Trunk/Interior/Intake

    and you have a clean car. i like the rims on it.
    wonder what itll look like lowered with tint.

  15. #15
    DX User
    Join Date
    Jul 2003
    Vehicle
    1985/Honda/AccordSEI
    Location
    Kuching, Sarawak, Malaysia, Borneo Island.
    Posts
    20

    Re: Custom Trunk/Interior/Intake

    sweet ride, and your moon roof still working!!

  16. #16

    carotman's Avatar
    Join Date
    Jul 2000
    Vehicle
    89 Accord LX/B20A | 87 Accord Hatch "S" Stock | 94 Civic Hatch CX
    Location
    Montreal South Shore
    Posts
    9,984

    Re: Custom Trunk/Interior/Intake

    I'll be honest. I think you got a real sweet car but now... it looks kind of unfinished

    The LCD screens fit badly in the headrests. It needs some kind of finishing trim around them.

    The headliner is very nice however.

    I think the rims are too big for the car too.

    http://pages.videotron.com/omus
    3geez member since July 12 2000

    I need these parts!
    https://www.3geez.com/forum/showthread.php?t=67742

  17. #17

    blazin3gen's Avatar
    Join Date
    Dec 2002
    Vehicle
    1988 Honda Accord LX-i (done for) 88 crx si 91 bmw, 93 lexus es300 project88dx accord
    Location
    Good Ol Cali
    Posts
    7,150

    Re: Custom Trunk/Interior/Intake

    shit is tight.. more pics?!

    and agree rims look to big? or needs a drop!

  18. #18

    A20A1's Avatar
    Join Date
    Sep 2001
    Vehicle
    2006 Chevy Cobalt LS
    Location
    Kaneohe, Hawaii, United States
    Posts
    88,734

    Re: Custom Trunk/Interior/Intake

    Looks great.

    I'm not a fan of large rims, but maybe the rims just look too big without a set of larger disk brakes to fill in the void, plus the skinny spokes don't help either.
    - llia


  19. #19
    DX User rideordie12's Avatar
    Join Date
    Sep 2010
    Vehicle
    93 EG sedan*sold* 93 prelude*sold* 90 EF sedan*sold* DA integra *totaled R.I.P.* -93 EG sedan -83 SZ accord sedan
    Location
    Puget sound, WA
    Posts
    58

    Re: Custom Trunk/Interior/Intake

    sweet ride! did you have the interior done or did you do it yourself?

Similar Threads

  1. custom trunk separator...
    By Rockcord in forum 2geez Accords
    Replies: 6
    Last Post: 12-04-2006, 07:58 PM
  2. custom interior question
    By spnrx in forum Interior & Exterior Care
    Replies: 13
    Last Post: 03-27-2006, 03:30 PM
  3. Custom Trunk Stuff
    By Nyodreamz in forum Interior & Exterior Care
    Replies: 5
    Last Post: 12-14-2003, 04:11 PM
  4. Suggestions for a custom trunk setup
    By kicker1_solo in forum Interior & Exterior Care
    Replies: 13
    Last Post: 10-14-2003, 10:53 AM
  5. Custom interior
    By redricer89 in forum Interior & Exterior Care
    Replies: 9
    Last Post: 12-09-2002, 08:27 PM

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
This website uses cookies
We use cookies to store session information to facilitate remembering your login information, to allow you to save website preferences, to personalise content and ads, to provide social media features and to analyse our traffic. We also share information about your use of our site with our social media, advertising and analytics partners.
     
Links monetized by VigLink