I have to take the covers off the hatch taillights anyway, because the set I got have mud inside of the housings , I have no idea, but it's an easy fix. this is just a mockup, the panel i have the lens in is cardboard, to see what it will look like, what do you think? of should i try find a set of square driving light lenses? I have a set of LED back up light bulbs, i'll mount them in the housings before I put in the reflectors.
Not bad,why is it only the hatchbacks have clear covers over the colored lights anyway.
just the design i guess, i can polish all the scratches out of the clear cover, really easy, i may end up spraying the inside with night shade, just a little bit darkerOriginally Posted by import racer
lost only use one coat at most 2 for the night shade that stuff sprays dark, IMO our cars are for the most part square i would keep with the rest of the body lines and try finding square lights. The one things that sucks about the hatch tails is the stress cracks , it annoys the hell outta me
1989 Accord Lx-i hatchback (current DD project)
1986 Olds Cutlass 442 clone (never ending project)
3Geez resident body man
Owner of Wreck-less auto body
yea I think you are right, normally those square lights are everywhere, but when i need them, i can't find them
did you try looking at a tractor supply or trailer lights?
1989 Accord Lx-i hatchback (current DD project)
1986 Olds Cutlass 442 clone (never ending project)
3Geez resident body man
Owner of Wreck-less auto body
i'll have to look, what i need are a couple of small square clear driving lights, these replace the back up lights, i'm mounting LED backup bulbs in them. The rest of the lights will stay the same, this is just a minor modification,which makes the entire light look different , civic just blew a coolant hose so it will have to wait.
Go to Wal-Mart and buy some optronics driving lights.
15$, and they are small and square.
I use them on the front for driving/foglights, they use an H3 bulb so you will always find a bulb of any color. I wish my backup lights were as bright as them, they light up an area like 40Wx15H (feet..). So any walls behind you would be 100% visible, same with virtually anything else within like 5 feet from the lights
Edit - Here is a night time picture of them.
Last edited by CzEcHy; 07-01-2010 at 01:19 PM.
they make a lot of the trailer lights with LEDS now but the intensity of the lights may be an issue
1989 Accord Lx-i hatchback (current DD project)
1986 Olds Cutlass 442 clone (never ending project)
3Geez resident body man
Owner of Wreck-less auto body
those would be way too big, the backup light is in the middle of the red lens, I think the optronics lights would work, I don't want to use the halogen bulbs in them, due to heat issues, it's hard enough to find hatch lights, I don't want to melt one. I was going to modify them with LED backup light bulbs and seal the entire thing in the light housing.
I can't find them anywhere, i have an area apx 3 3/4 X 3 1/2 to work with, what are the size of those, I can't find something like that even on ebayGo to Wal-Mart and buy some optronics driving lights.
15$, and they are small and square.
I use them on the front for driving/foglights, they use an H3 bulb so you will always find a bulb of any color. I wish my backup lights were as bright as them, they light up an area like 40Wx15H (feet..). So any walls behind you would be 100% visible, same with virtually anything else within like 5 feet from the lights
Edit - Here is a night time picture of them.
Last edited by lostforawhile; 07-01-2010 at 05:43 PM.
What's rong with just puting leds in the stock taillight/back up light area?? That taillight looks mad ricey like that
well if I find a nice square one, it will look pretty much like it was factory, just different, the one in there I know doesn't look right, it was a concept at this stage, I was wanting to change the backup light from the diffused flat white light to a reflector type housing.
Lost try looking into this place called McMaster-Çarr
1989 Accord Lx-i hatchback (current DD project)
1986 Olds Cutlass 442 clone (never ending project)
3Geez resident body man
Owner of Wreck-less auto body
I have a catalog, as well as a new MSC catalog, they have fog lamps?
MSC didn't have anything, I'll keep my eyes open, i think a set of square ones set into an aluminum panel fit in there, would look like a factory part.
should of posted this thread sooner lost just so happens i had a pair of square fogs and i was giving them away for free but no one wanted them so i threw them away in the trash
https://www.3geez.com/forum/showthread.php?t=71283
Last edited by ShyBoyCA6; 07-01-2010 at 09:19 PM. Reason: posting thread
I know for sure the Wal-Mart here still sells them..
They are barely an 1 1/2-2'' wide and no more than an inch high..
square? if i ever get some money i may have to have you send me a set, what do they cost?
15$, bulbs/wires/switch etc...
They work well for me, I'll snap a picture of them on against a wall if you want?
I like them because the small square design they have flows with the large headlight square housing.
And like I said, they have had them for over a year and I don't think they are going to remove them from the shelf anytime soon.
well the reason I need them, is i'm going to use the lenses and reflectors to make the backup lights in the hatch taillight housings ,they will get LED backup light bulbs due to heat issues. They need a square or rectangle design to really fit the tails correctly as far as appearance
I tried taking some pictures but my g/f's 1100$ camera somehow can't pick up any of the light besides right in front of the car.. (Even tho they project such a wide beam I could find a needle in the grass next to my car with them on..)
Anyway they are a slight rectangle, more of a square, with a silver reflector in them and a presumably removable glass cover.
And from what I can tell the housings would be almost a perfect match to the white backup light plastic cover. (Maybe a slight bit short width but a perfect height.)
well I'll machine an aluminum piece to fit in place of each original lens and machine each one to fit the light
do you know the brand name?
Ya they were Optronics.
Next time I go shopping I'll snag a picture of the model number off the box, I don't have my box anymore.
Like I said they, they are 15$ so pretty good price wise.
Posting Permissions
Reply With Quote
Bookmarks