sorry to do this as my first post...

[sedanman]

I've been searching like crazy and i was reading on here the other night and i found a thread about what headers will fit on my 86LX-i... from newer civics i think it was...

i found more than a couple threads... but none covering that info... and it's making me mad... lol

like this one...
https://www.3geez.com/forum/showthread.php?t=63

and this one...
https://www.3geez.com/forum/showthread.php?t=53789

so im not a newb to the whole "search button" concept... i learned that lesson on feoa.net... i'm hoping the people on here will be as "not-newb-bashing-willing-to-help-me-out-or-at-least-point-me-in-the-right-direction" as they were there when i first showed up.

if i'm wrong, tell me so, don't cooommmpletely flame me...plz? lol

[2oodoor]

No headers from any Civic will fit, however there are some catback exhausts that may fit with modification.
Pacesetter headers are still easy to get for the A20xx engine in these cars.

[snoopyloopy]

i know there are a couple of sets of dc headers floating around the trading post as well...

[ghettogeddy]

just buy pacesetters there still available for our cars may be a lil more expensive then the chepo civic but none of the civic ones will fit anyways lol

http://www.google.com/products?q=86-...num=4&ct=title

take your pick

[nswst8]

The paceshitter will have to be modified. But otherwise it will be a good choice only choice unless you can find a DC header, I have one but won't let it go for less than $500 on second thought I'm not letting it go at all.

Last time I let one go it wasn't appreciated.

[2oodoor]

I hear ya, not appreciated... im curious now.

why would a paceshetarrrr need modification? O2 bungs, too many?

[ghettogeddy]

I hear ya, not appreciated... im curious now.

why would a paceshetarrrr need modification? O2 bungs, too many?

only thing i can think of is the egr pipe thats not used you can use a 5 speed tranny fill bolt its on the side and if you use one o2 just seal the other hole with an old used o2

[nswst8]

The ball and socket joint just before the cat, squeals like a banshee.

[lostforawhile]

The ball and socket joint just before the cat, squeals like a banshee.

al you have to do is weld in a flange and get a generic flex coupling to go in there like factory.

[Pico]

another option is to cut a notch in the frame right where the down pipe starts to bend.
But I'd do what lost suggested, that's how my pacesetter is done

[sedanman]

i know pacesetter's are "readily available" but i heard some pretty negative things about their welding ability. One of the only reasons i have avoided ordering one... Is this true? and as far as putting a bolt in an EGR bung, that is nothing close to "modify" lol i was thinking re welding or something drastic like that...

[ghettogeddy]

ya only people that seem to have probs are the onse that keep the pacesetter ball joints instead of going flex pipe its a lil more money but it will save you done the road
im gona run the ball joint on mine till i can afford a flex pipe

[nswst8]

al you have to do is weld in a flange and get a generic flex coupling to go in there like factory.

I had already upgraded to a DC header. Now I would recommend to anyone to get a Pacesetter. You will have to modify the ball joint in my experience with the pacesetter. And I actually owned one.

[2oodoor]

how does one "not appreciate" , nvm not important

Paceshredders... There was a problem with the flange to pipe welds back in the day, I dont know if that has been corrected or not. They used to need redressing and welded up then a nice port match job or reverse of that process lol .. and then they are jam up jelly tight.

[ghettogeddy]

how does one "not appreciate" , nvm not important

Paceshredders... There was a problem with the flange to pipe welds back in the day, I dont know if that has been corrected or not. They used to need redressing and welded up then a nice port match job or reverse of that process lol .. and then they are jam up jelly tight.

sounds like some one bought one off him and did not follow through with somehting

idk how some one can not appreciate something they bought lol must be an inside joke

[lostforawhile]

I wouldn't complain too much,at least they are made. it's eaisier to reweld and blend some welds then to make headders from scratch

[sedanman]

very good point...

[MessyHonda]

yeah..pacesetters are not too bad. i have the ceramic coated one with the factory flex and i added an extra o2 bung for an air/fuel read out.

[Accordtheory]

The paceshitter will have to be modified. But otherwise it will be a good choice only choice unless you can find a DC header, I have one but won't let it go for less than $500 on second thought I'm not letting it go at all.

Last time I let one go it wasn't appreciated.

That's funny shit. You call it a "paceshitter", and then say it wasn't appreciated?
$500? lol. I'll sell my a20 sidewinder manifold for that right now, and that's worth about 10x what a "paceshitter' is.

[A20A1]

https://www.3geez.com/forum/showthread.php?t=37261

[lostforawhile]

That's funny shit. You call it a "paceshitter", and then say it wasn't appreciated?
$500? lol. I'll sell my a20 sidewinder manifold for that right now, and that's worth about 10x what a "paceshitter' is.

I think he was referring to the dc header for 500 not the pacesetter for 500 you could buy 2 new pacesetters from summit racing

[Accordtheory]

I think he was referring to the dc header for 500 not the pacesetter for 500 you could buy 2 new pacesetters from summit racing

Yeah, I just re read the post. But still, $500 for a header, no way..

[MessyHonda]

Yeah, I just re read the post. But still, $500 for a header, no way..

not alot of us have money...with 500 bucks you can do I/H/E if you go with the pacesetter