h22 in a 3g

[-$MOKIN-]

Hey johny i just got a idea. What if 3GEEZ created a alotment of money for a part for your car would you put the 3geez logo sticker on it?

[Johnny O]

Of course I would put the sticker on it. I definely support the site. I took the motor apart and i spun a main. i have it at the shop getting fix now. I guess I forgot or not put any or enough loc-tite on one of the flywheel bolts and i came loose and i broke the bolt and it caused some damage to the flywheel. I am not giving up yet. It will be back up soon, i promise.

[lostforawhile]

hey what did you do with the old a20 and all the broken parts? we ought to have a three geez auction for them, or they could be made into homemade trophys for those that win accord of the month,your car is a legend here. anything off of it would be a treasure to people on here.

[lostforawhile]

hey Johnny if you can find me some broken bits from the a20,something that you exploded while running it, i would be willing to put it together with some aluminum pieces i've made and some three geez parts, and make a one off trophy for accord of the year. i already have wooden trophy bases, and i can get the engraving done cheap, the homemade trophys are becoming very popular with the grassroots movement in old Japanese cars.

[rfiks]

I once did a F20A 4g SI swap in a 3G - fabricated mounts from MS steel, trimmed the RHS chassis leg for the tranny, trimmed rear cross member for the tranny bell, its the same dimensions as a H22 - when I got bored of it, I put a H22 head on it and swapped out the ECUs (as the harness was made by myself), I already put in the VTEC wires, revved like a motorcycle engine and went like a horse with wasabi on its nads.

If someone wants to use the stock 3G cluster with a H22 - get a GM or VW inline VSS - it runs off the speedo cable - you would need to cut the cable and fabricate two ends with knurled rings for it - hey presto VSS signal and original speedo working

(in 4 progress, pix and VIDEO "lil help with how you swaped this beeest into a 3g- call Hondatuning")

[gfrg88]

hey what did you do with the old a20 and all the broken parts? we ought to have a three geez auction for them, or they could be made into homemade trophys for those that win accord of the month,your car is a legend here. anything off of it would be a treasure to people on here.

He sold a lot of parts on here a while ago.. I remember I had bought some of them too..

[b20a86lude]

have u gys seen the guyon prelude power who succesfully swapped the jdm h22 in his 2nd gen simply amazin

[89T]

Johnny O running today at E-town?

[Johnny O]

Well i got the car running and went to fall nationals. The car sounded awesome and it was strong. Well sat nite, 1st round of qualifier i run a 11.2@87 mph @15 lbs. You may ask why such low mph that is because i did a 2-3-2 shift and doing that is caught it quickly but not fast enough. I bent some valves and it ended my weeken. I went to shift into 4 and it won't go in and instead of put it in easy i slammed it in but not in 4th but 2nd. I will fix and planning to go to MAryland for the last event.

[89T]

good luck at maryland, I was glued to the computer following you'r progress at the nat's.
GRS said they had a video of you'r run but they still have not posted it. Are you taking a spare head this time around?

[Johnny O]

Yeah i am going to be bring an extra one but i also fab up a 2nd gear lock out so i cann't shift onto second again.

[Johnny O]

http://www.grs-motorsports.com/notic...ll2009/111.wmv
here is the link to the run. Scary!!!!!!!

[lostforawhile]

great video!!!!

[MessyHonda]

http://www.grs-motorsports.com/notic...ll2009/111.wmv
here is the link to the run. Scary!!!!!!!

outch poor motor

[2ndGenGuy]

Damn, looks great to see a 3gee hauling ass like that! Sorry about that mis-shift man, that blows! Can't wait to see what she can do with a good clean run!

[lostforawhile]

not a bad time at all considering you BENT valves. There are plenty of cars that can' t go that fast with the engine in one piece. want to send me one of the destroyed valves for my cabinet? I'll put it with a picture of the car with that run

[Rendon LX-i]

SHIT ....sorry to see.....wtf happen. i just see the right wheel just go out. shit 11s and broke fuck now thats CLOWING

[Johnny O]

Well once again the is going back together. Fab up a 2nd gear lock-out and planning on going to e-town on sunday for import survivor series. Hope to see some people out there.

[89T]

good luck!

[Johnny O]

I will be in maryland for the event this weekend. If anyone wants to come out and watch that would be cool. Would like to meet some people.

[89T]

just checking in to see how you came out this last weekend.

[Johnny O]

I didn't go to MD but i went to e-town last sun. I ran a 10.74@138@18lbs. 2nd pass i ran 10.54@114@25lbs. I let off in 4th because oil pressure lite came on. I might go again on sunday and continue on the conquess for a 9 second pass.

[Bass Man]

9 seconds would be increadible. I have a 4-3 shift problem quite often, but my tranny is pretty dang F'd to begin with.

[89T]

I didn't go to MD but i went to e-town last sun. I ran a 10.74@138@18lbs. 2nd pass i ran 10.54@114@25lbs. I let off in 4th because oil pressure lite came on. I might go again on sunday and continue on the conquess for a 9 second pass.

nice run's johnny, I cant wait for the 9's. I know you have some video right. what were you'r 60's like?


Did the oil pump take a shit. what's the oil pressure at you'r shift point?
what oil are you running?

[Johnny O]

My 60' on the 10.5 pass was 1.59. the crankpulley bolt loosen up on me and i run an external pump and it threw the belt. the oil pressure is up there on the shifts and I'm running mobile one 10w30